2021 Sabre 42 Fly Bridge

The Sabre 42 Fly Bridge is the outcome of close discussions with Sabre’s clients and owners. The results: a yacht with the same level of personal luxury and comfort our owners have come to expect, with the added benefit of a fly bridge for an open air experience. The bridge offers an efficient layout both for entertaining and cruising, and joystick-controlled pod drives provide confidence and security while maneuvering.

Inboard motors, pod drives, and expert hull design make the cruising experience quieter and more fuel efficient than with outboards, while simultaneously maintaining truly satisfactory cruising and WOT speeds. Interior spaces preserve their functionality, even with the addition of the bridge, making for an uncompromisingly luxurious experience. Owners continue to enjoy all the comfort and amenities available in our iconic Salon Express series, with the added open-air space of the bridge.

Basic Boat Info

Make: Sabre
Model: 42 Fly Bridge
Year: 2021
Category: Power
Designer: Sabre Design Team
Construction: Fiberglass


Length: 41 ft
Length Overall: 46 ft
Beam: 14 ft
Max Draft: 3'4 ft
Bridge Clearance: 18'11 ft
Dry Weight: 31,500 lb
Deadrise: 16 °
Single Berths: 6

Engines / Speed

Engines: 2
Engine #1 Specs:
  • Make: Cummins
  • Model: QSB
  • Engine Power: 425hp
  • Type: Inboard
Engine #2 Specs:
  • Make: Cummins
  • Model: QSB
  • Engine Power: 425hp
  • Type: Inboard


Fuel Tanks: 1
Fuel Tank Capacity: 380 gal
Water Tanks: 1
Water Tank Capacity: 140 gal
Holding Tank Count: 1
Holding Tank Capacity: 60 gal


Boat Class: Flybridge, Motor Yachts
More Info : Manufacturer Website
  • Modified Deep “V” Planing hull design, with shallow pod drive tunnels for Cummins Zeus propulsion system
  • 16º deadrise at transom, 23º deadrise amidships
  • ISO NPG white gelcoat w/vinylester backup resin
  • Bottom, topsides and transom resin-infused biaxial E-glass with Corecell SAN foam core
  • Stringer system biaxial E-glass with foam core
  • VIP resin infused swim platform with molded-in anti-skid surface and under-mount ladder.
  • Hull side rubbing strakes
  • PVC rub rail with stainless steel cap
  • Painted urethane double boot top
  • Gold color recessed cove stripe
  • 1 1/4″ Diameter type 316 stainless steel perimeter rail system
  • (6) 12” Stainless steel cleats: two forward, four mid-ship
  • (2) Bollard cleats in aft cockpit
  • 10” Stainless steel cleat to starboard of windlass as anchor rode tie off
  • Custom cast stainless steel mid-rail line chocks
  • Custom cast stainless steel skene chocks forward
  • Custom stainless steel bow pulpit with dual anchor roller
  • Anchor windlass, electric rope-chain type
  • Teak flag staff and socket on taffrail
  • Teak table in cockpit
  • Burgee staff for bow pulpit
  • Lewmar Low Profile polished aluminum hatches w/screens
  • Custom stainless steel opening port lights
  • Teak toe rails
  • Teak cabin-side eyebrow
  • Custom cast stainless steel “SABRE” logo
  • Raw water washdown system at bow
  • Kahlenberg single chrome air horn
Deck and Hardtop
  • ISO NPG gelcoat
  • Resin-infused biaxial E-glass with balsa core
  • Molded-in anti-skid deck surfaces
  • Stainless steel bi-fold entry door
  • Sliding windows in salon cabin sides
  • One fixed and one opening window in salon aft bulkhead
  • Hinged access door to side deck at helm
  • Flush, outward opening, transom door with latch
  • Anchor locker with slam latch
  • Lazarette hatches with gas struts and compression latches
  • Hand rails at each corner on cockpit coamings
  • Large engine room hatch in the main salon with compression latches
  • White rub rail and black bang rail on all dark colored hulls
  • White rub rail and white bang rail on all light colored hulls
Lower Helm
  • Cummins DTS single lever electronic controls
  • One Cummins Smart Craft display (engine data, tank levels, vessel data, alarms)
  • Triple windshield wipers with washers
  • Ritchie Compass
  • Switch controls for horn, running lights, anchor light, engine room blower and optional equipment
  • Stazo 400mm custom teak steering wheel with tilt helm and Sabre logo
  • Stidd N-series helm seat with Ultraleather fabric
  • NMEA 2000 backbone
Flybridge Helm
  • Cummins DTS single lever electronic controls.
  • Single Cummins Smart Craft display (engine data, tank levels, vessel data, alarms).
  • (2) Stidd N-series helm seats. (One in main salon)
  • Teal table on fixed base
  • L-settee dry storage below.
  • 16” Stainless steel steering wheel with tilt helm.
  • Controls (see propulsion)
  • Stainless steel fly bridge ladder with teak treads.
  • Mid-level galley
  • Solid surface galley counter top
  • Stainless steel under mount sink with Scandvik faucet
  • Birds Eye Maple galley sole
  • Vitrifrigo 2-drawer Refrigeration with stainless steel doors
  • Isotherm 1-drawer Freezer with stainless steel door
  • Two burner touch control electric cook top
  • Convection microwave with stainless steel door above aft counter
  • Cabinet with (2) louvered doors on the forward bulkhead
  • Drawers and storage lockers below counter
  • Built-in waste basket
  • Large drawer under microwave opens athwartships
Main Salon
  • “L” settee to port with storage and Sabre tool drawer beneath. 5” foam cushions covered with Sunbrella fabric.
  • Oval high gloss table with hi-low pedestal, lowers to coffee table height
  • Settee to starboard with drawer storage below
  • Sound deadening soft headliner panels
  • Stidd N series helm chair
Forward Stateroom
  • Cherry hull ceilings
  • (2) Drawers under berth with A/C return grills under drawers
  • (2) Drawers in bureau w/locker w/shelf above and single louvered door
  • Upper enclosed shelves with storage behind. Cabinet face has (2) louvered doors
  • Recessed shelf with fiddle on starboard main bulkhead
  • Large cedar lined hanging locker to port, with louvered door, shelf and hangar pole
  • Open shelf above port hanging locker
  • Teak and holly sole
  • Sound deadening soft headliner panels
  • Pocket door accessing the forward stateroom
Second Stateroom
  • Double berth, 6″ foam mattress, ¾” laminated trim
  • Cherry hull ceilings
  • (4) Drawers under berth, A/C return grille beside
  • Forward bulkhead storage locker and shelf
  • Night stand with drawers below
  • Teak and holly sole
  • Sound deadening soft headliner panels
  • Pocket doors between lower foyer and second stateroom
  • Optional dinette is available

Contact Us

More From Sabre

2021 Sabre 38 Salon Express
2021 Sabre 42 Salon Express
2021 Sabre 48 Fly Bridge
2021 Sabre 66 Dirigo Salon Express